Login  |  Register
Nissanhelp.com - All About Nissan
Do-It-Yourself Maintenance Owners Manuals Recalls/Campaigns Service Bulletins Service Manuals Nissan OBDII Codes Glossary & Acronyms More...
Member's Ride Photos Stock Photo Gallery
Classifieds - For Sale Classifieds - Wanted To Buy Classifieds - Mechanic Wanted Classifieds - Auto Services Search Auto Parts
Register FAQ Social Groups Mark Forums Read
brake question Forums > > brake question brake question
Forgot Password? Join Us!


Sentra Nissan Sentra Discussion Forum

Reply
 
Thread Tools Display Modes
  #1  
Old 07-14-2019, 05:37 PM
mike1701 mike1701 is offline
Registered User
2009 Sentra
 
Join Date: Jul 2019
Posts: 2
Default brake question

Finally did my first drum brakes on my car, 2009 Sentra 2.0, wasn't too intimidating, but I noticed when I changed my drivers side, the wheel cylinder was leaking, I can do the job, that's not my concern, my concern is the brake bleeding procedure, ive watched several videos on youtube about bleeding the brakes, however is there anything I need to do differently because my car has ABS? Thanks all
Reply With Quote
  #2  
Old 07-18-2019, 04:34 AM
smj999smj's Avatar
smj999smj smj999smj is offline
Master Enthusiast
2006 Pathfinder
2003 Frontier King Cab
2003 Frontier KC SVE 4x4
 
Join Date: Jun 2012
Location: Prospect, VA
Posts: 1,772
Default

As long as you don't run the master cylinder dry, you should need to bleed the entire brake system. Get a rubber cap (if you have the rubber cab still on the brake bleeder nipple, you may be able to use that) to cap off the end of the brake line after you disconnect it from the wheel cylinder to prevent the fluid from running out. Change out the wheel cylinder and then top off the master cylinder, if needed. Remove the cap from the line and connect it to the wheel cylinder. Then, when everything is back together and the rear brakes are adjusted, just bleed the line to the wheel cylinder you replaced. Since brake fluid will be running out of the line from the moment you disconnect it, it doesn't suck air into the hydraulic circuit. So, the only air you will really be bleeding out is that which was in the wheel cylinder, itself. Now, that's all you have to do unless your plan is to flush the entire brake hydraulic system. If that's the case, follow the brake bleeding procedure in the factory service manual, which you get free, online access to at NICO Club. The fact that it is ABS usually isn't an issue or change much in the bleeding procedure. Sometimes they well instruct to disconnect the battery before bleeding. Also, don't assume that the bleeding procedure is "furthest back to closest to the master cylinder," like was the standard procedure eons ago. That's not always the case on cars with ABS systems and Nissan has several bleeding procedures depending on the year and model of the vehicle.
Reply With Quote
  #3  
Old 07-18-2019, 04:03 PM
mike1701 mike1701 is offline
Registered User
2009 Sentra
 
Join Date: Jul 2019
Posts: 2
Default

I have access to the sentra maintenance, and it says to either disconnect the ABS actuator and electric unit, or disconnect the negative battery cable. I'll just disconnect the battery, thank you very much.
Reply With Quote
Reply

Bookmarks

Tags
brake, question

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 03:11 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO v2.0.42 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.