Login  |  Register
Nissanhelp.com - All About Nissan
Do-It-Yourself Maintenance Owners Manuals Recalls/Campaigns Service Bulletins Service Manuals Nissan OBDII Codes Glossary & Acronyms More...
Member's Ride Photos Stock Photo Gallery
Classifieds - For Sale Classifieds - Wanted To Buy Classifieds - Mechanic Wanted Classifieds - Auto Services Search Auto Parts
Register FAQ Social Groups Mark Forums Read
2005 Nissan Sentra keyless entry problems Forums > > 2005 Nissan Sentra keyless entry problems 2005 Nissan Sentra keyless entry problems
Forgot Password? Join Us!


Sentra Nissan Sentra Discussion Forum

Reply
 
Thread Tools Display Modes
  #1  
Old 08-31-2012, 04:55 AM
Patroll Patroll is offline
Registered User
2005 Sentra
 
Join Date: Aug 2012
Posts: 1
Default 2005 Nissan Sentra keyless entry problems

Bought a 2005 Nissan Sentra 1.8S ,for my dauther. Car didn't have a standard nissan key,or remote. So went on e-bay bought one , key less remote.Then it says stick key into ignition switch about 6 times and remove the key within 10 seconds, till emegency lights flash. this happened, then it says to re-enter key turn to acc. and hit any button on keyless remote once and emergency lights will flash again. (PROBLEM) That happened, but remote will only work while your in the car, or very close to the drivers side. Won't work from any distance. Could my remote be bad? Or is my Smart Control Module located under the drivers side right leg side panel ,be bad? Dauther needs remote any help. Thanks
Reply With Quote
  #2  
Old 08-31-2012, 08:48 AM
ritter ritter is offline
Master Enthusiast

2004 sentra
 
Join Date: Mar 2007
Posts: 594
Default

YES!For all.
You need to try reprogram the remote including operating the auto driver door at the end. (try a few time)
Your remote might not be good for newer Nissan cars (check factory number)
You sentra smart box might not operate properly.
Instruction.
. Close and lock all doors with the driver’s side power lock/unlock switch.

2. Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard
Lamps will flash if you have performed this step successfully. NOTE: Withdraw key completely from ignition cylinder
each time. If this procedure is performed too fast, system will not enter programming mode.

3. Insert key into the ignition cylinder and turn to the ACC position.

4. Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press
the button more than one time in the above step. If the button is pressed more than one time, the programming
procedure will not be successful.

5. If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver’s side
power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should
flash. Repeat this step for each transmitter (including any existing transmitters).

6. Turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch and open the driver side door.
GOOD LUCK!
Reply With Quote
Reply

Tags
2005, entry, keyless, nissan, problems, sentra

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 11:10 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO v2.0.42 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.