#1
|
|||
|
|||
2009 Rogue - Front Hub Assembly
Does anyone have experience replacing this? If so, confirm you must remove the knuckle to do so.
Also, how do you disconnect the black rubber line running to the knuckle? |
#2
|
||||
|
||||
Quote:
Quote:
__________________
Need A Repair Shop? Find local automotive repair shops in your area. AutoCodes.com Shops |
#3
|
|||
|
|||
Thanks for the reply and the pic.
I don't see how you can remove the bolts that hold the hub assembly in place as the axle is preventing access to allow a socket on the bolts. If anyone knows how to do this please advise. The rubber line is not the brake hose but much smaller, I think it goes to some type of sensor inside the knuckle. It would not be necessary to remove it if the knuckle can stay in place. |
#4
|
||||
|
||||
Quote:
__________________
Nissan Master certified Technician
Hybrid and GTR certified EV certified ASE Master Certified. |
#5
|
|||
|
|||
Thanks, I will do that.
I did try to take off the knuckle completely but couldn't get the lower ball joint loose. Is the lower ball joint always so difficult to separate? |
Tags |
2009, assembly, front, hub, rogue |
Thread Tools | |
Display Modes | |
|
|