#1
|
|||
|
|||
How to replace RH catalytic converter 04 Quest
Due to a road hazard, I have to replace the RH catalytic converter and three way exhaust pipe. How do I get the two back bolts loose? I have removed the heat shield, but cannot get a wrench on them due to other parts.
|
#2
|
||||
|
||||
The removal and installation procedures are found in Engine Mechanical manual. Manuals are found in Knowledgebase section at the top menu tab. You can download the manual for free from this site. Also search on youtube for videos.
|
#3
|
|||
|
|||
I found the instructions, but it called for an engine lift and the removal of the front suspension member (basically, remove the entire front end and lift/lower the engine). I finally figured out I could use a 14mm Crowfoot wrench to get the back two nuts loose and then use them to tighten the nuts back when I put it back together.
|
Tags |
catalytic, converter, quest, replace |
Thread Tools | |
Display Modes | |
|
|