04 Nissan Quest will not fire or get fuel after timing rail replacement
Replaced the tensioner and rail on my Quest. Got everything back together and it fired right up and ran 5-7 minutes. I hadn't added coolant yet so I shut if off to do so. Started it back up and it died before I got out of the vehicle. Now it just turns and turns and occasionally will act as if it's about to start but doesn't. Tore everything back apart to ensure everything was put back correctly. Still no start. Doesn't appear to have any fire on the front bank. Rear bank is tough to check. Noid light say's injectors aren't pulsing either but there is some fuel on plugs occasionally. Fuel pump is engaging. I'm thinking either cam or crank sensor or NATS system. I've checked all fuses as well. No codes showing up at all with my father n laws Snap-on scanner. Any ideas would be greatly appreciated. Supposed to leave for Colorado in a couple days! Crank Sensor is only $40 so it will get put in tomorrow. I thought briefly it could have jumped time but when it ran after initial startup it sounded great. I also wouldn't think that would explain no spark and no fuel.
FYI When this gets solved I WILL post solution. My biggest pet peeve are open ended problems on threads!!
|