#1
|
|||
|
|||
rear power sliding door won't close fully
Hi all,
I recently purchased a '07 Quest with power sliding doors. After getting a battery jump the rear pass. door doesn't close fully anymore, leaving the warning light etc. on. I then have to step out and manually push the door further to latch. I have tried disconnecting the battery (again) and the initialization sequence from the manual, but no change. The car had the same problem when i first bought it, after they jumped it to get started on the lot. At that time, a mechanic there was able to fix the door problem within 15 minutes. unfortunately, that shop is 500 miles away, and I haven't been able to get anyone on the phone that knows how they fixed it. The fact that it's showing the same symptoms after a second battery jump, makes me think it's the same problem with an easy fix, that shouldn't require a trip to the dealer. Anyone have any ideas? Much appreciated. Thanks -- Erwin |
#2
|
|||
|
|||
solved
Problem solved, the latches were gunked up. I clean and lubed the latches, and the problem went away. No connection to the jump start.
thanks -- Erwin |
#3
|
|||
|
|||
I have a similar problem, what exactly did you do?
|
Tags |
close, door, fully, power, rear, sliding |
Thread Tools | |
Display Modes | |
|
|