Nissanhelp.com Forums

Nissanhelp.com Forums (https://x.nissanhelp.com/forums/)
-   Frontier (https://x.nissanhelp.com/forums/frontier/)
-   -   Nissan Frontier DIY, Technical Information, Manuals, Bulletins and Recalls/Campaigns (https://x.nissanhelp.com/forums/frontier/38-nissan-frontier-diy-technical-information-manuals-bulletins-recalls-campaigns.html)

NissanTech 08-01-2005 08:24 PM

Nissan Frontier Technical Information, Manuals, Bulletins and Recalls/Campaigns.
 
Technical Information with access to recall information, Full Technical Service Bulletins (TSBs) and comprehensive diagnostic and repair information

Useful Threads

-- Timing Chain Tensioner Whine VQ40 repair
-- Door Panel Removal Procedure

DIY Projects
Nissan Frontier Do-It-Yourself Projects

Bulletins List:
Nissan Frontier Bulletins


Recalls/Campaigns List:
Nissan Frontier Campaigns/Recalls


Service Manuals:
Nissan Frontier Service Manuals

Owners Manuals:
Nissan Frontier Owner's Manuals


Towing Guides:
Nissan Frontier Towing Guides


Accessories Installation Guides
Nissan Frontier OEM Accessories Installation Guides

.

artk50 01-03-2008 10:21 AM

I'm looking for the torque specifications for reinstalling the front brakes on my 2006 Frontier. Where can I find them?

NissanTech 01-03-2008 10:41 AM

"Brake System" section of the service manual. You can download the section free from here: http://x.nissanhelp.com/forums/Knowledgebase/links/176

artk50 01-03-2008 12:59 PM

I had done that and I'm guessing that one of the numbers on the "Components" page next to the bolts must be the Torque setting. Are those in Newton Meters? If so, the torque on the Torque Memeber Bolt of 185 seems pretty high.

Or am I totally off base?

NissanTech 01-03-2008 05:23 PM

1 Attachment(s)
Quote:

Torque Memeber Bolt of 185 seems pretty high
For the caliper mount is no to high.

Newtons-meter (kilogram-meters, ft-lb)

Here is the page BR-22:

steeler fan 09-22-2008 01:27 PM

How do you remove the radio cluster lid on a frontier 2006 model.

caseyd68 02-04-2009 05:59 AM

Won't start
 
My 99 Frontier won't start I suspect a fuse or fusible link. I have power to all the lights and dash. Yet when you turn the key all you get is a click at the power socket relay on the fuse block in engine compartment.

tech22 02-04-2009 10:40 AM

Check all your grounds and at the starter.Also try tapping on the starter relay.

Lawmanruiz 06-01-2009 12:15 PM

Hi All
Got a 2001 -Diesel
Nissan Frontier with King Cab with YD25 Ti engine and 5 Fw Manual Trans.
Situation has always been a very hard clutch pedal - replaced clutch plate/pressure plate pilot bushing twice within the last two years.
Old parts seem fine.
It comes out of the shop working fine and then after about two months or so -gets back hard.
Can some one please help ?
Please advise if there is a link for the service manual for this diesel model.
Thanks in advance,
Lawmanruiz

julian 07-26-2009 05:23 PM

donde esta el "konck sensor ' en un 2000 nissan frontier 6 v

poncepr 07-30-2009 02:41 PM

my nissan frontier won't grab reverse

tim1202 08-08-2009 12:48 PM

Anyone know how to remove the vent control valve on a 2005 Frontier? I've got the hose & electrical plug disconnected but can't get thevalve out, even after turning it almost 180 degrees.


All times are GMT -8. The time now is 07:42 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO v2.0.42 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.