2011 Pathfinder trunk not opening - HELP!!
I think my actuator that opens the trunk is not working, and the problem is that I cannot figure out how to open the trunk manually. The only way to open the trunk is to push the exterior button above the license plate, but its not doing anything. I checked all the interior fuses to see if that was the problem but they looked good. I had to check them all because there is nothing listed for rear hatch on the fuse panel. I can open the glass hatch on the trunk, but not the trunk door. Also there is no cinch motor so that's not the issue. I went inside the truck and tried to manually open the trunk through the little square hole inside on the interior trunk door panel, but could not figure a way to open the door that way. Im assuming there is a method through the hole - thats probably the purpose of the hole being there. I cannot take off the inside panel to access the actuator without opening the trunk door - so Im kind of screwed. Ive tried everything and looked online for hours with no results. If anyone can point me in the right direction I would be very grateful!!! thanks in advance
|