#1
|
||||
|
||||
what size and type wrench for a differential oil change 2003 pathfinder
Front differential oil change on 2003 Nissan PATHFINDER
does any one know what size and type hex or square wrench I will need for this type of lube change in the-front and rear differential |
#2
|
|||
|
|||
My 2001 uses a 1/2" ratchet head. Square. Yours is probably the same.
HTH |
#3
|
||||
|
||||
wrench sizes differential
Quote:
Thanks gotswdust, did you have any trouble getting the plugs out, theres all kinds of rust around mine, I just squirted some good penetrating oil on the plugs |
#4
|
|||
|
|||
Not much trouble, even though I live in NE Ohio where snow and salty roads are common during winter. Good penetrating oil like PB blaster should do the trick.
I had to use a short 2" extension on my 1/2" ratchet as my drain plug was slightly recessed. You may need a long handle ratchet or a breaker bar. But it will come off with some leverage. The fill plug was a little more inaccessible. I threaded a hose from the top of the engine and filled with gravity from the top. |
#5
|
||||
|
||||
drain plug gear oil
Quote:
|
Tags |
2003, change, differential, oil, pathfinder, size, type, wrench |
Thread Tools | |
Display Modes | |
|
|