#1
|
|||
|
|||
1996 Pathfinder Blower Motor Removal
I need to replace my power antenna. The antenna connection and the power source connection are behind the blower motor.
I have tried to remove the motor but it won't just drop down. IS THERE A TRICK TO REMOVING THE MOTOR TO GAIN ACCESS TO THE ANTENNA CONNECTIONS? Thanks for any help. Ron Last edited by NissanTech; 07-29-2009 at 09:35 AM. Reason: Remove e-mail address to avoid spam |
#2
|
||||
|
||||
I don't think you will be able to access the connector by just removing the blower motor. I think you have to remove the entire "Intake Unit" (See Diagram).
Unfortunately I don't remember exactly where the connector is, it's been a while since I have done one of those, but I have attached a diagram that may help you locate the connector.
__________________
Need A Repair Shop? Find local automotive repair shops in your area. AutoCodes.com Shops |
#3
|
|||
|
|||
Thanks for the reply.
The intake unit is what I was refering to as the blower motor and that is what I am trying to remove. But after removing all the bolts the unit does NOT just drop down out of the way. IS THE A TRICK TO REMOVING THE UNIT? DO I ALSO NEED TO REMOVE THE COOLING UNIT? I HOPE THAT'S NOT THE CASE. Thanks again. |
Tags |
bloer motor removal, power antenna replacement, radio repair |
Thread Tools | |
Display Modes | |
|
|