I'm working on a 1994 4x4 automatic for a friend. Apartently he got stuck in the snow and was flooring it. When he got out, he only had 1st and 3rd forward. Reverse also works just fine. I did the self diag. and came up with line pressure solenoid so I dropped the pan and valve body, replaced the line pressure solenoid and the other three it was attached to. I then found that the brake band bolt had sheered off, so I replaced that and adjusted the bolt as directed by the service manual. Put it all back together and still no 2nd or 4th gear. Ran the self diag. again and comes up with nothing. I drove this thing for about 8 miles thinking it might have to relearn itself but to no availe, at least I have engine braking when on decell now. Any help or ideas would be greatly appriciated since my head can't take much more of being banged against the wall. Thanks for your time. Jason