#1
|
|||
|
|||
timing issue 86.5 Nissan PU d21 with a z24I
My engine z24i is a oldie but goodie. Tight, good compression,burns no oil.
The problem - it stumbles on acceleration (just a little) and burns a little too much fuel. I checked the timing. It's about 5 degrees AFTER TDC at idle. It cannot be adjusted out. The engine has never been opened. I am the only owner. I just replaced the Throttle sensor because it was throwing a code. Any help would be appreciated. |
Tags |
865, d21, issue, nissan, timing, z24i |
Thread Tools | |
Display Modes | |
|
|