Login  |  Register
Nissanhelp.com - All About Nissan
Do-It-Yourself Maintenance Owners Manuals Recalls/Campaigns Service Bulletins Service Manuals Nissan OBDII Codes Glossary & Acronyms More...
Member's Ride Photos Stock Photo Gallery
Classifieds - For Sale Classifieds - Wanted To Buy Classifieds - Mechanic Wanted Classifieds - Auto Services Search Auto Parts
Register FAQ Social Groups Mark Forums Read
350z wont start Forums > > 350z wont start 350z wont start
Forgot Password? Join Us!


Nissan Z Nissan 240Z, 260Z, 280Z, 280ZX, 300ZX, 350Z, 370Z, Discussion Forum

Reply
 
Thread Tools Display Modes
  #1  
Old 11-28-2008, 09:32 PM
cianchetti
Guest
 
Posts: n/a
Default 350z wont start

I just bought a 2005 350z with 12000 miles from a repo auction. It does not run however it does turn over fine. I shot a little either in it to see if it was fuel starved but nothing. (Keep in mind this car is in new condition not what you would think of coming from a repo sale) I was told it may be the security interlock. I have both keys and the clicker. If anyone could point me in the right direction that would really save me some time and expense. The nissan garage wont look at it till tuesday and I am home on leave for the holidays so if I cant get my new car running I will have to wait till the next time I can make it home.

Thanks agian
Brian
Reply With Quote
  #2  
Old 11-29-2008, 01:57 AM
vpnavy's Avatar
vpnavy vpnavy is offline
Tech Enthusiast
2015 Rogue
 
Join Date: Mar 2007
Location: York, PA
Posts: 2,138
Thanks: 2
Thanked 13 Times in 13 Posts
Default

Until a Specialist replies...I pulled this from your Service Manual Section BL - BODY, LOCK & SECURITY SYSTEM

VEHICLE SECURITY SYSTEM DEACTIVATION - To deactivate the vehicle security system, a door must be unlocked or back door (for Coupe) or trunk (for Roadster) must be opened with the key or key fob. When the BCM receives either above signal or unlock signal from key fob, the vehicle security system is deactivated (Disarmed phase).

Now, according to NVIS (NISSAN VEHICLE IMMOBILIZER SYSTEM-NATS) - If customer reports a “No start” condition, request ALL KEYS to be brought to an NISSAN dealer in case of a NVIS (NATS) malfunction. The section goes on to say...

Your ECM isn't new - so don't do this! I just wanted you to see the procedure for information purposes only

ECM Re-communicating Function AIS00146 - Performing following procedure can automatically perform re-communication of ECM and BCM, but only when the ECM has been replaced with a new one (*1).

*1: New one means a virgin ECM which has never been energized on-board. (In this step, initialization procedure by CONSULT-II is not necessary)

NOTE:
When registering new Key IDs or replacing the ECM other than brand new, refer to CONSULT-II Operation Manual NATS-IVIS/NVIS.

If multiple keys are attached to the key holder, separate them before work.

Distinguish keys with unregistered key ID from those with registered ID.

1. Install ECM.
2. Using a registered key (*2), turn ignition switch to “ON”.
*2: To perform this step, use the key (except for card plate key) that has been used before performing ECM replacement.
3. Maintain ignition switch in “ON” position for at least 5 seconds.
4. Turn ignition switch to “OFF”.
5. Start engine.

If engine can be started, procedure is completed.

If engine cannot be started, refer to CONSULT-II Operation Manual NATS-IVIS/NVIS and initialize control unit.
__________________
SHOW YOUR SUPPORT!
Subscribe

FIND OUT WHAT YOUR REPAIR SHOULD COST?
Repair Cost Estimator

BUY NISSAN ACCESSORIES!
Nissanhelp Store
Reply With Quote
  #3  
Old 11-29-2008, 07:57 AM
cianchetti
Guest
 
Posts: n/a
Default

Thanks


If the keys lost there codes or are out of sink with the car would the engine still turn over?

I am dollying it down to advanced right now to check the codes
Reply With Quote
  #4  
Old 11-29-2008, 08:27 AM
deeznuts
Guest
 
Posts: n/a
Default

If you have a Nats failure(ie wrong key), yes the car will crank, but no will not start. (nats= Nissan anti theft system).
Reply With Quote
  #5  
Old 11-29-2008, 02:29 PM
cianchetti
Guest
 
Posts: n/a
Default

The repo man may have tried to start the car with a key from the bank that want not sinked to the car. I took it to advanced auto via car dolly and they found no codes. So I dropped it of at nissan garage. hopefully it is just a issue with the security. Thanks for everyone help and I will post what nissan tell me and the results
Reply With Quote
  #6  
Old 12-06-2008, 07:30 AM
cianchetti
Guest
 
Posts: n/a
Default

The nissan dealer told me it needed a ipdm and I replaced it and paid them a hundred for looking at it and it still does not run. It cranks but no ignition or fuel. The fuel pump runs but the injectors dont fire

Anyone have any ideas. I am going to replace the crank sensor and if that doesnt work im lost
Reply With Quote
  #7  
Old 12-12-2008, 04:01 AM
tech22's Avatar
tech22 tech22 is offline
Master Enthusiast
2005 Frontier Crew Cab Frontier Crew Cab
05 nissan frontier
 
Join Date: Jan 2008
Location: alliance,ohio
Age: 65
Posts: 2,049
Thanks: 0
Thanked 14 Times in 13 Posts
Default

I think you need to take the car in and have the proper keys reprogrammed.
Reply With Quote
  #8  
Old 12-16-2008, 02:21 PM
cianchetti
Guest
 
Posts: n/a
Default

It turns out someone installed the fly wheel on my car 180 degrees out. So I spent a grand to fix something I could have fixed myself if I had only known. Sucks but I didnt have any choice. If anyone needs a ipdm for a 350z 04-06 let me know I have an extra
Reply With Quote
  #9  
Old 09-22-2016, 02:32 AM
Dyls350 Dyls350 is offline
Registered User
2003 350Z
 
Join Date: Sep 2016
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Hey guys soo ive just chamged the head unit in my 2003 350z not the windows do not work and also the car turns over and over again but will not fire the fuel pump does not turn on whem the car turns to on either please help
Reply With Quote
  #10  
Old 09-23-2016, 03:22 PM
smj999smj's Avatar
smj999smj smj999smj is offline
Master Enthusiast
2006 Pathfinder
2003 Frontier King Cab
2003 Frontier SVE
 
Join Date: Jun 2012
Location: Prospect, VA
Posts: 1,630
Thanks: 1
Thanked 241 Times in 224 Posts
Default

Well, I would check your fusible links and fuses to begin with.
Reply With Quote
Reply

Bookmarks

Tags
350z, start

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 10:43 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO v2.0.42 (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.