Tip on replacing window motor in 350Z
I replaced the drivers window motor in my 2008 NISMO today. After seeing the photos and videos it looked pretty easy. Well, actually it is, if the window WAS UP when the motor went south.
Mine was stuck down. What made my install easy was that I removed the glass! This allowed me to R&R the motor with the inner panel on the bench and I attached the regulator rails to the panel before I put it back in the car.
Just make sure that you don't change the adjusters (the two nuts you remove at the bottom of the panel). This ensures the glass moves like it did before.
This makes it way easier than trying to realign the regulators rails in the car with the heavy glass installed.
__________________
TheBigDrag
2008 350Z Nismo #918
|