Login  |  Register
Nissanhelp.com - All About Nissan
Do-It-Yourself Maintenance Owners Manuals Recalls/Campaigns Service Bulletins Service Manuals Nissan OBDII Codes Glossary & Acronyms More...
Member's Ride Photos Stock Photo Gallery
Classifieds - For Sale Classifieds - Wanted To Buy Classifieds - Mechanic Wanted Classifieds - Auto Services Search Auto Parts
Register FAQ Social Groups Mark Forums Read
97 Maxima starting problem w/ bad crank sensor (ref) Forums > > 97 Maxima starting problem w/ bad crank sensor (ref) 97 Maxima starting problem w/ bad crank sensor (ref)
Forgot Password? Join Us!


Maxima Nissan Maxima Discussion Forum

Reply
 
Thread Tools Display Modes
  #16  
Old 06-27-2016, 09:55 PM
OilCanObserver OilCanObserver is offline
Enthusiast
1995 Maxima
 
Join Date: Apr 2010
Posts: 58
Default

if the hard start continue to persist, suggest you do the following:
1. make sure there's no intermittent disconnection (breaks) of wiring between the ckps (ref) & the sub-connector on top of the engine block. replacing these wiring could be difficult because it's routed in tight spot & the possibility of getting caught by the ps system.

2.code 1335 could also be caused by slow speed of the starter motor due to insufficient current flow between the battery & the starter motor body caused by poor ground. use 3 #10 awg (of equal length & as short as possible) in parallel. use # 10 O-ring terminals for each, & connect to the negative terminal of the battery, bunch the other ends with #6 O-ring & connect it to the most accessible mounting bolt of the transmission body to the engine block. make sure both sides of the washer, the mating surfaces of the bolt head with the washer & the transmission body with the washer shiny clean. (you may also connect to one of the starter mounting bolts & make sure all mating surfaces are shiny clean as previously described.)

the main negative cable is bolted to the engine block. imo, the grounding connection from the engine block to the transmission body, is through the mounting bolt (threaded to the engine block), through the mating surfaces with the bolt head with the washer, & through the mating surfaces of the washer & the transmission body. if there's oxidation (corrosion) to those (mating surfaces) poor ground could result. the mounting ear holes of the transmission body for the mounting bolts are quite big. imo, there may not be physical contact with the mounting bolt shank & transmission body, hence no electrical connection. (alternatively, you don't need to add ground wires as long as you can make all those mating surfaces of the washers, bolt head & transmission body shiny cleaned, but it could be a pita.)

Last edited by OilCanObserver; 06-27-2016 at 09:57 PM.
Reply With Quote
  #17  
Old 08-27-2016, 12:24 PM
Hotchymotchy Hotchymotchy is offline
Registered User
1995 Maxima
 
Join Date: Jul 2011
Posts: 11
Default

Problem solved. Shredded p/s belt damaged Cranck Sensor harness so Had it replaced all the way back to the ECM. Starts and runs great again. Shop said the 2 wires from the CPS were roached all the way back to the connector at the computer.
Reply With Quote
  #18  
Old 09-10-2016, 08:27 PM
Hotchymotchy Hotchymotchy is offline
Registered User
1995 Maxima
 
Join Date: Jul 2011
Posts: 11
Default

Turns out that replacing the 2 crank sensor wires all the back to the Engine Control Module fixed the problem. Harness must have gotten damaged and shorted when the p/s belt came apart.
Reply With Quote
  #19  
Old 12-04-2017, 09:22 PM
logansinc logansinc is offline
Registered User
1997 Frontier Crew Cab
2010 Titan Crew Cab
 
Join Date: Dec 2017
Posts: 2
Default This girl has been voted as the sexiest woman in the world

Wow, she is one of the most beautiful girls I have seen
Miranda Kerr is beautiful - YouTube
Reply With Quote
Reply

Tags
bad, crank, maxima, problem, ref, sensor, starting, w or

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 09:51 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO v2.0.42 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.