#1
|
|||
|
|||
Nissan tech plzz help me...
I put a new motor in my 00 Maxima and she started right up... No misfires shaking noting she was purring like a baby... I let it run for about 30 min so everything could get in sync but the car turned off and didn't turn back on...this happened Wednesday and I still havn't been able to get the car on... I'm getting fuel to the engine but Iits drowing the plugs... I'm pretty sure i'm not getTing any spark cause all the car does is crank but doesn't turn on I hooked up a power probe i'm getting power and ground thru the wiring 2 the coils but no spark... What could it be?
|
#2
|
|||
|
|||
All these views but no1 2gimme any ideas.. Wassup
|
#3
|
|||
|
|||
Any body
|
#4
|
||||
|
||||
You might need to replace your crankshaft and camshaft sensors.
|
#5
|
|||
|
|||
That's it?
|
#6
|
||||
|
||||
We have problems and life of our own as well.
Did you use the engine from the same model and year? Did you replaced or inspect the camshaft position and crankshaft position sensors? What is the fuel pressure (PSI)? Quote:
I suggest starting by checking if there is spark at each cylinder, and if there is spark you may have to do a compression test. The new motor you install may have jumped timing.
__________________
Need A Repair Shop? Find local automotive repair shops in your area. AutoCodes.com Shops |
#7
|
|||
|
|||
Quote:
|
#8
|
||||
|
||||
Quote:
Quote:
Quote:
|
#9
|
|||
|
|||
Thanx Nissan tech... Ill get to work...
|
#10
|
|||
|
|||
Yo thanx allot guys..I changed the sensors and the car started with no problems..appreciate the help Benny nd Nissan tech...
|
Tags |
nissan, plzz, tech |
Thread Tools | |
Display Modes | |
|
|