#1
|
|||
|
|||
Dead insterment cluster
Currently my 99 Frontier has analogue gauges. The Speedo will not get above 15 MPH, the Tach will not go over 1000 RPM, and both the Fuel & Temperature gauge’s read about 1/4 inch above the max. The cruise control will turn on, from the dash, but will not engage. The Odometer now reads 999,999 miles, and just stays there, while the trip odometers work like the truck is going 15 MPH. Other than all of this the truck appears to function normal.
I have checked the back of the dash pod to ensure that the wiring harnesses were in, then removed, and re inserted, gave all screws on back of pod a 1/4 turn tightening. No improvement. HELP! Solution and if it is the cluster where can i get one the dealer is having problem obtaining one ! |
#2
|
||||
|
||||
Quote:
I included a copy of your Instrument Cluster Trouble Diagnostics. Hope this helps.
__________________
SHOW YOUR SUPPORT!
Subscribe FIND OUT WHAT YOUR REPAIR SHOULD COST? Repair Cost Estimator BUY NISSAN ACCESSORIES! Nissanhelp Store |
#3
|
|||
|
|||
Thanks I have cleaned conections a couple of times . It does work intermitantly.Will use the test info ,Thanks again.
|
Tags |
cluster, dead, insterment |
Thread Tools | |
Display Modes | |
|
|