#1
|
|||
|
|||
08 frontier abs issue
Trucks a crew cab, v6, 6 spd. The abs light has been on most of the time I've owned the truck about a year n 2-3000 miles. It went off a couple times after washing it. Also had a bad front bearing that I thought was the cause. Fixed the bearing. Drove it for awhile. The abs n slip light were still on. I was able to have codes read with a snap on reader, that says c1113. It could read wheel speed sensors and that all checked out. The c1113 is only listed as g sensor. I went to a junk yard n grabbed a couple. Tried to replace it but my truck doesn't have the sensor. A nissan parts site says the sensor is only on vdc equipped models. Mine has no vdc light, off button, or sensor. It doesn't seem like the dealers I talked to can see if it came with it or not from the vin. I think it's safe to say it doesn't have vdc. I want to clean all the grounds. All the connectors I've checked have been good, but check what I can get to easily again. Anyone have any other ideas?
|
#2
|
|||
|
|||
Try another better code reader, there is probably more than 1 code. I'll ask my mechanic buddy about the C1113 code for Frontiers. We will be finishing the installation of the brake kit and aftermarket dirt bike exhausts on the bike tomorrow.
|
#3
|
||||
|
||||
|
#4
|
|||
|
|||
If a Snap-On DTC Scanner gave you a DTC for a Sensor that your truck doesn't have , then either your truck has non-original equipment PCM (main computer) , or , scanner is wrong .
Start with new scan ... If previous owner had a problem that he , or wrench-hacks couldn't solve , they say , "needs a new computer" . 'TARDS' - p f f t t t ........................................
__________________
Traded my '94 vette for an '02 Frontier. What's wrong with me? What's right with me??? Last edited by Schrade; 03-24-2021 at 01:54 PM. |
Tags |
abs, frontier, issue |
Thread Tools | |
Display Modes | |
|
|