#1
|
|||
|
|||
01 frontier 3.3 fuel pump issues
Hi new here.. I've been reading through posts on this issue and haven't found answer.. I bought the car off my father inlaws estate so dont know history..when i got the the truck it had been sitting for 3 mths .. Jump started it and left it running for about hr.. When I was walking up to it it died like the key was turned off.. Since then towed home.. Anyways after checking things the fuel pump is not running.. Checked fuse, replaced relay, checked ecm relay all good.. Finally read thread to jump red / white wire on back of fuel pump relay.. Pump runs and truck starts.. Find wire at back of ecm jump it .. Relay works and pump runs.. So guess my question is is it a bad ecm or am I missing something.. Thank you all..
|
#2
|
|||
|
|||
How's your research so far? My buddy got his Frontier project we'll work on after we finished installing the brake kit and dually wheels on the current Superduty project. The Frontier also isn't starting and the wasn't working at all. We'll try that white and red wire jumping.
|
#3
|
|||
|
|||
Quote:
Before you start jumping Wire's together not knowing what will happen, I would suggest you Read the Nissan Service Manual and Follow it's guidance. It doesn't take much to damage the Electronic Module's. I've heard just a power spike from a loose Battery cable can take out the ECM, and they are not cheap. If you can't understand the Nissan Service Manual or don't have the equipment to show the Trouble Code's and know what they mean, My Advice is to take it to Nissan and let them figure it out. It could very well be cheaper than jumping wire's together not knowing what will happen. Good Luck,
__________________
2013 SVV6 KC AT 2WD Frontier, '93 4Cyl, AT, KC Hardbody(20yrs Orig Owner-Sold 174K mi.) |
#4
|
|||
|
|||
Turn out to be ecm.. Had to buy replacement due to to much damage inside.. The frontier is currently running great..
|
Tags |
frontier, fuel, issues, pump |
Thread Tools | |
Display Modes | |
|
|