#1
|
|||
|
|||
abs, vdc off & slip lights on, no check engine or codes
This happened out of the blue to my 2010 4 liter 4x4. The abs, vdc off & slip lights are on but there are no codes or check engine light. Brakes are good, no low tires or fluids, obvious physical damage or loss of power. Any suggestions?
|
#2
|
||||
|
||||
Have you had it checked for ABS codes? They have to be checked with a code reader or scan tool capable of reading "C-codes."
|
#3
|
|||
|
|||
No, not yet. The nearest placed to read the codes is an our away. Looks like I may have to
find some decent software and connector to read codes myself. My wife has a 2012 Xterra so it may be money well spent. Know any good windows 7 software for any possible codes? |
#4
|
||||
|
||||
No, I don't. I use an Autel MaxiCheck MX808 which sells for around $370. It reads all the codes and works on just about every passenger car and light truck with an OBD II connector. Also does isle air volume relearns, throttle actuator re-learns, TPMS registering, views and graphs live data from multiple systems, etc. It comes in handy.
YouTube |
#5
|
|||
|
|||
Have you been able to get this fixed? I have a 2011 frontier and mine kept doing that but it would choke out when I would try to accelerate from a stop. If it went over 2K rpm it would just rev itself up and down. Put it in the shop and ended up having a loose wire to the computer. Good luck!
|
Tags |
abs, check, lights, slip, vdc |
Thread Tools | |
Display Modes | |
|
|