#1
|
|||
|
|||
Doesn't Start When Engaging Clutch Pedal
When i push the clutch pedal to start my manual 2007 Frontier it does nothing, so i have to try (push it) several times to start my truck. Does this sound like a bad switch in the pedal or is there an adjustment i can make to engage the switch at a better (or higher) spot when pushing clutch pedal ???
|
#2
|
||||
|
||||
Check the rubber part that pushes on the clutch switch. I have seen a few that the switch pushes through the rubber.
__________________
Nissan Master certified Technician
Hybrid and GTR certified EV certified ASE Master Certified. |
#3
|
|||
|
|||
what if it did poke thru...is there a quick fix or better fix then the rubber and do you have any pics or info on where this rubber is located or how to fix or change it ?
|
#4
|
||||
|
||||
a 1/4 ounce stick on wheel weight works perfect ,if rubber stop on pedal is broken place weight over hole in clutch pedal be sure to mount weight on the side that makes contact with clutch switch ,remove broken rubber bumper first
Last edited by p993doctor; 07-16-2012 at 03:31 PM. |
Tags |
clutch, engaging, pedal, start |
Thread Tools | |
Display Modes | |
|
|