#1
|
|||
|
|||
remove/replace cabin microfilter
2009 Quest: I only found 2 screws on top of the glove compartment and 3 on the bottom. After removing all 5 screws, I am unable to remove the unit. The right side of the glove compartment lies underneath the door trim. The bottom of the unit can be pulled about 1/2" out but something is holding the top section. I don't see any other screws around the hook where the latch is located. I pulled the rubber bumpers but no screws behind. According to the picture I saw covering the 2009 quest, it is different. Can someone help me point out anything changes or suggestions regarding on R/R procedures on the micro filters? Thanks.
|
#2
|
||||
|
||||
Did you follow the instructions here? 2004-2009 Nissan Quest In Cabin Micro Filter Replacement Procedure | Nissanhelp.com
__________________
Need A Repair Shop? Find local automotive repair shops in your area. AutoCodes.com Shops |
#3
|
||||
|
||||
Quote:
__________________
Nissan Master certified Technician
Hybrid and GTR certified EV certified ASE Master Certified. |
Tags |
cabin, microfilter, remove or replace |
Thread Tools | |
Display Modes | |
|
|