#1
|
|||
|
|||
getting a DIG-T-R from a DIG-S
The DIG-S seems to be the platform the Zeod DIG-T-R was built on. A preliminary check of the specs shows the same 3 cylinder aluminum block. Increasing the bore to ~4" and losing the supercharger will make it ready to turbo with roughly the same 1.5L displacement. Target whp is about 400@7500rpm with torque getting over 250ft/lbs@4000rpm. Anybody have an idea on how to achieve this?
|
Tags |
dig-s, dig-t-r |
Thread Tools | |
Display Modes | |
|
|