#1
|
|||
|
|||
Interior Front Door Handle
Any tips on replacing the interior front door handle of 2006 Pathfinder? Thanks.
|
#2
|
||||
|
||||
You need to remove the door panel first. Once the door panel is removed, then just remove the screw holding the door handle and disconnect the lock cables. Here are the instruction from the service manual to remove the door panel.
Removal 1. Remove power window switch assembly. The switch pops up - Disconnect harness connectors. 2. Remove pull handle escutcheon. 3. Remove pull handle cover and remove screw. 4. Lift armrest upward to release clips and remove armrest. - Remove screws behind armrest. 5. Remove memory seat switch (if equipped). - Disconnect harness connector. 6. Release clips and remove door finisher. - Disconnect lock cable and handle cable from door handle assembly. 7. Remove pull handle/lock lever assembly.
__________________
Need A Repair Shop? Find local automotive repair shops in your area. AutoCodes.com Shops |
Tags |
door, front, handle, interior |
Thread Tools | |
Display Modes | |
|
|