Login  |  Register
Nissanhelp.com - All About Nissan
Do-It-Yourself Maintenance Owners Manuals Recalls/Campaigns Service Bulletins Service Manuals Nissan OBDII Codes Glossary & Acronyms More...
Member's Ride Photos Stock Photo Gallery
Classifieds - For Sale Classifieds - Wanted To Buy Classifieds - Mechanic Wanted Classifieds - Auto Services Search Auto Parts
Register FAQ Social Groups Mark Forums Read
Nissan Armada Idle Air Volume Learning Procedure Forums > > Nissan Armada Idle Air Volume Learning Procedure Nissan Armada Idle Air Volume Learning Procedure
Forgot Password? Join Us!


Armada Nissan Armada Discussion Forum

Reply
 
Thread Tools Display Modes
  #1  
Old 02-08-2018, 12:32 PM
jtaormino55 jtaormino55 is offline
Registered User
2008 Armada
2008 Armada LE
 
Join Date: Feb 2018
Location: York, Pa
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default Nissan Armada Idle Air Volume Learning Procedure

I performed the Idle Air Volume Learning procedure but when I finished, my "check engine" light was still on and my idle in PARK is a little over 1000 RPM (it drops to about 750 in DRIVE). At the end of "step 9" shown below, it says the check engine light should be on. Finishing up the procedure it never says when the check engine light should turn off.

If I re-run the procedure do I also have to re-run the “Accelerator Pedal Released Position Learning” and the “Throttle Valve Closed Position Learning” every time I re-run the Idle Air volume procedure?


9. Fully release the accelerator pedal within 3 seconds after the CEL is ON.
10. Start engine and let it idle.
11. Wait 20 seconds.
12. Rev up the engine two or three times and make sure the idle speed and ignition timing are within the specifications.
Idle speed = 650 ± 50 rpm (in P or N position)
Reply With Quote
  #2  
Old 02-09-2018, 06:03 AM
NissanTech's Avatar
NissanTech NissanTech is offline
Super Moderator
2004 Xterra
 
Join Date: Jun 2005
Location: California
Age: 47
Posts: 12,168
Thanks: 473
Thanked 589 Times in 528 Posts
Default

Quote:
At the end of "step 9" shown below, it says the check engine light should be on. Finishing up the procedure it never says when the check engine light should turn off.
At the end of the procedure.

Quote:
If I re-run the procedure do I also have to re-run the “Accelerator Pedal Released Position Learning” and the “Throttle Valve Closed Position Learning” every time I re-run the Idle Air volume procedure?
No, you don't have to do it.

Why are you performing the Idle Air Volume Learning procedure?
__________________
Need A Repair Shop?
Find local automotive repair shops in your area.
AutoCodes.com Shops
Reply With Quote
  #3  
Old 02-09-2018, 07:12 AM
jtaormino55 jtaormino55 is offline
Registered User
2008 Armada
2008 Armada LE
 
Join Date: Feb 2018
Location: York, Pa
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Hi... I was following a link in the Titan forum and also in ClubArmada where several folks recommended running some "reset / relearn" procedures. Since I recently purchased my 08 I wanted to get it back to stock specs instead of what it had learned from the previous owner.
I ran the ECU reset, the Accelerator Pedal Release Position Learning, the Throttle Valve Closed Position Learning, and the Idle Air Volume Learning (Throttle Position Learning) procedures. All of the other procedures worked out great but the throttle position procedure left me with the check engine light still on and a high idle RPM.
Reply With Quote
Reply

Bookmarks

Tags
air, learning, nissan, procedure, volume

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 03:48 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO v2.0.42 (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.