#1
|
|||
|
|||
PLEASE HELP, car started fine but had P0011 & P0340 so I replaced the sensors but now won't start
PLEASE HELP, car started fine but had P0011 & P0340 so I replaced the sensors but now won't start.
2005 altima 2.5L Replaced Camshaft and Crankshaft sensors with new OEM Nissan brand Changed oil and oil filter Now the car won't start! Is there any reset I need to do? Thanks |
#2
|
|||
|
|||
have you checked your battery? a bad battery is the first thing to check for and also if the alternator is chargering
P0340 2004 Nissan Altima Sedan Camshaft Position Sensor Circuit OBDII Engine Light Trouble Code | Engine-Codes.com |
#3
|
|||
|
|||
Battery and alternator both good. When I said it won't start I meant run. It turned over fine.
UPDATE, this morning the car now starts but continues to throw the P0340 code. Cant pass my New York inspection with this MIL DTC. |
#4
|
||||
|
||||
Did you get the sensors as a kit? If so, did you use the one with the white paint mark as the crank position sensor? The sensors look alike but are distinguished by a white paint mark on the crank sensor.
|
#5
|
||||
|
||||
I believe his issue on this one was a broken connector on the crank sensor. I think this is the same car that i responded to a post on craigslist. I gave him a connector to splice on and haven't heard from him so i am assuming that he got it fixed. Also i think it was a P0335 code that he had.
__________________
Nissan Master certified Technician
Hybrid and GTR certified EV certified ASE Master Certified. |
Tags |
car, fine, p0011, p0340, replaced, sensors, start, started |
Thread Tools | |
Display Modes | |
|
|