#1
|
|||
|
|||
96 altima wont start after replacing ignition switch
I replaced the ignition switch on my 96 nissan altima today and i test started it 3-4 times before putting dash back on and it was fine. after i put dash back on i tried to start it and nothing, no dash lights or radio. i can hear it click but wont start. i checked connection, checked fuses, checked if replacement was faulty, tested and cleaned battery, checked the wires under the dash by the steering wheel and cant seem to find anything. what happened? it was fine before the dash was put back on.
|
#2
|
||||
|
||||
You may have blown a fuse while installing the dash or a connector got disconnected.
__________________
Need A Repair Shop? Find local automotive repair shops in your area. AutoCodes.com Shops |
#3
|
|||
|
|||
he figured it out today. it was a relay he said
|
Tags |
altima, ignition, replacing, start, switch |
Thread Tools | |
Display Modes | |
|
|