#1
|
|||
|
|||
2002 Alti..plastic fasteners, lower splash shield ?
I have tried 2 different black plastic fasteners to install a new lower, underneath the engine, splash shield on the Alti. Can anybody tell me what size, what part number, where to buy about 20, of the correct fastener, or might even be 2 different sizes used ? I am tired of buying what looks correct, little button in the center that plunges the center down thru the outer ring/sleeve and then expands once in and holds in place.
What is the size needed, or better yet part number(s), and where is a good place to get them please? Thanks, FRD |
#2
|
||||
|
||||
I got a pack of 13 push type rivets from NAPA by Balkamp. The package says Nissan #665-2417.
|
#3
|
|||
|
|||
Here is what you need:
Five of 01553-09241 (these fasten it to the bumper) Four of 01553-09321 (these fasten it to the metal of the subframe) You can get them at the dealership but they are pricey; search on ebay with each part number and you will find them for a lot less. These clips are used across a lot of Nissan models so the listing might not say it's for an Altima but it should work. I recommend buying from a US based seller since it will get to you much faster than if you bought from someone in China or Hong Kong. |
#4
|
|||
|
|||
Thanks guys, I will start looking for these.
FRD |
Tags |
2002, alti plastic, altiplastic, fasteners, lower, lower splash shield, shield, splash |
Thread Tools | |
Display Modes | |
|
|