#16
|
|||
|
|||
What are the mechanics talking about when they say the camshift position sensor bank 1 is inside the distributor and needs to be replaced as a whole? 02 Nissan Xterra V6
|
#17
|
|||
|
|||
2005 maxima
try replacing camshaft position sensor for bank 1 and broke the connector. any place i can find the connector/plug please thanks. engine 3.5L
|
#18
|
|||
|
|||
I had the P0345 error on my 2006 Altima. This led me to beleive that I was having an issue with bank 2 camshaft position sensor. I replaced it myself (very easily). However the same problems shiwed up again. Stalling, not starting, and running like it was stuck in highest gear. Long story short, I found that the negative from the battery had broken off of the engine chassis. I fixed that and now everything is working normally now. TCS off light, slip light, and check engine light are no longer illuminated.
|
#19
|
|||
|
|||
Pelaced both sensors still the same problem... Lights back on same codes ..what now?
|
Tags |
camshaft, p0345, position, sensor |
Thread Tools | |
Display Modes | |
|
|