#1
|
|||
|
|||
Reconditioning HV Cells
Using an Imax b6ac v2 charger to try and recondition cells on a 2007 Altima hybrid.
Prior to charging, voltage on all cells were 7.60-7.77 VDC After a 2 minute discharge with a halogen they averaged 7.25 VDC just 1 hit 7.08VDC My charger settings are as followed Battery Type-NiMH NiMH charge currant-1.0A NiMH auto charge currant 1.0A NiMH discharge-1.0A Cut: 6.0A NiMH Re-Peak-2 NiMH cycle/charge-3 System Settings Timer-Off Cap Cut Off-7800mAh Temp Cut Off-122 degrees Rest Time-5 minutes NiMH Sensitivity D,Peak 6mV/Cell After only 20-30 minutes charge (4 cells so far) is complete with around 8.5 VDC but only showing between 1100-1500mAh What should the final VDC/mAh be? (I seen they should be at least 6500mAh) Also are my settings correct if not what would be the best setting? |
Tags |
cells, reconditioning |
Thread Tools | |
Display Modes | |
|
|