View Single Post
 
Old 03-04-2016, 07:16 AM
Boosted_specv328's Avatar
Boosted_specv328 Boosted_specv328 is offline
Registered User
2002 Sentra SE-R
2006 Sentra SE-R
 
Join Date: Mar 2016
Posts: 2
Default

I know this is am old thread but I wanted to clear up the confusion about these 3 sensors. The picture that the o.p. posted is the correct location of the variable timing control sensor. U can't get them from pepboys or autozone,or whatever auto parts store u go to.it is located on the timing cover is a 10mm bolt and Use a flat head and pry on it lightly, then pull it out. The camshaft position sensor is on the driver side of the cylinder head by the thermostat housing. And the crank shaft position sensor is on the back of the block at the very bottom on the driver side is directly in front of my rear motor mount. I have the spec v QR25DE+T. The camshaft and crank shaft position sensor ate the same part# 2 different parts but they use the same sensor. So hippie that helps a little.
Reply With Quote