View Single Post
 
Old 07-01-2013, 08:15 PM
Hollywood1 Hollywood1 is offline
Registered User
2003 Altima
 
Join Date: Aug 2012
Posts: 12
Default

Awesome, Thanks guys.

My GF is on her way over with the nissan dealer Sensor right now.
I only bought one from the dealer thinking it would most likely be the Crankshaft sensor. Was gonna swap out the Duralast one that I put in 2 days ago and see if the dealer one made a difference.

When I removed the old Camshaft sensor, I did notice a good amount of oil on the steel can, but didn't think much of it because the camshaft does circulate oil. It wasn't gunked and wiped clean but just wet.
I'll check the connector also to make sure its clean.

Both sensors were replaced with Duralast 2 days ago along with a new Fuel pump a week ago.
If I still have the hard start problem after replacing the Cam sensor, then I will most likely check the Fuel pressure to make sure the fuel pump is working correctly or the line isn't bad.

Also replacing the plugs with new ones.

What is a good compression number for the cylinders?
Im gonna recheck the compression also.

I'll get back with update.

Thanks Again!
Reply With Quote