View Single Post
 
Old 12-27-2009, 08:06 PM
Sentrado
Guest
 
Posts: n/a
Smile

If the color is OK, feather sand the damaged area, masking the rest not to mess it up, finish with 600 or 1200 grit paper. Use bondo to fill any grooves you might have. Sand it smooth and flush. With spray wheel primer give it a coat (thin, very thin coats are the way to go). Then spray your paint, again two very thin coats will work much better than a coarse one. Finally, finish up with two coats of clear lacquer (same brand and also spray).
IMPORTANT: Do wait till one coat dries, before applying the next. Also, don't mess up the car, remove the wheel from the car for painting.
Cheers.
Reply With Quote