First thing you should do is unplug the front and rear motor mounts. The connectors are brown. Both should be located neat the transmission bell housing where it meets the engine block. One is near the front and the other is a little higher. After that you will want to relearn the idle air volume. I have always done it with a nissan scan tool so I don't know if it can be done without it. If the relearn does not work the next step would be to replace the ecm. You can remove the ecm and the cover and sometimes see where the circuit is burned out.
__________________
Nissan Master certified Technician
Hybrid and GTR certified
EV certified
ASE Master Certified.
|