View Single Post
 
Old 10-09-2020, 07:34 PM
co-nissan co-nissan is offline
Registered User
2001 Pathfinder
 
Join Date: Oct 2020
Posts: 2
Default Update.....

I took my meter and verified I had constant voltage to the sensor harness @ Bank 1 and 2, which I did. Also measured the resistance for both banks and it read just below 2Ω. I did the same for the front IVT control solenoid. Good constant voltage but no resistance reading for the ground wire. Any suggestions on what to do next? Kinda learning on the fly here. (newbie) Thanks

Last edited by co-nissan; 10-09-2020 at 08:07 PM.
Reply With Quote