View Single Post
 
Old 05-06-2019, 05:14 PM
mpe235's Avatar
mpe235 mpe235 is offline
Moderator
2015 Rogue
 
Join Date: Jun 2006
Location: New York
Posts: 5,530
Default

Quote:
Originally Posted by Robert Phares View Post
Botched my motor oil change by not getting a better view of the bottom end of my engine & transmission . Anyhow I drained an unknown amount of CVT fluid into an oil pan that already had old oil in it . I realized my error but it was too late . I may have drained 2 quarts or more . I then found through many sources that there is no dipstick to assist in a simple refill . This 2017 Rogue only has 20,000 miles on it . Is there a simple answer such as continuing to drain all the fluid and refilling to whatever fluid capacity ?
On the transmission case next to the transmission pan you will see a bolt with a 14mm head. To check the level pour about what you think you drained out into the fill tube. Start the engine and let it run until it is up to operating temperature and remove the bolt. Fluid should run out. If it doesn't add more fluid. When it slows to about one drip per second you are at the correct level
Reply With Quote