View Single Post
 
Old 04-09-2019, 12:05 PM
cschwehm cschwehm is offline
Registered User
2013 Pathfinder
 
Join Date: Apr 2019
Posts: 4
Default

So, after doing some checking, there were 2 issues. First, I was using the switch on the exterior door handle, not the plunger switch inside the door. The second issue is that for the R52, it is a bit different to get the sequence going. Mine must be R52 as it is a 2013 model Pathfnider. The sequence to remember is 5-10-3. This means, that, with the vehicle off, press the starter button 5 times, then the door plunger 10 times, then finally press the starter button 3 more times. After that it started the diagnostic sequence and repeated 3 times. Thanks everyone for the help.
Reply With Quote