View Single Post
 
Old 03-23-2019, 12:00 AM
Howard Bell Howard Bell is offline
Enthusiast
2011 Versa
2017 Altima SE-R
 
Join Date: May 2018
Posts: 43
Default

Obviously you likely have an oil passage obstructed. I'd be looking for where as if early enough it could also be blocking off major oil flow to the cam bearings on that side depending on how the oil circuit runs. There may be a restrictor somewhere in it, that would be a likely place to stop up.



If an oil pressure light only and no gauge you really cannot assume the pressure is fine. The lights trigger off at under 10 psi and no engine can live on only that. And even electric OP gauges are often way incorrect too.
Reply With Quote