View Single Post
Old 04-07-2018, 07:44 AM
smj999smj's Avatar
smj999smj smj999smj is offline
Master Enthusiast
2006 Pathfinder
2003 Frontier King Cab
2003 Frontier KC SVE 4x4
Join Date: Jun 2012
Location: Prospect, VA
Posts: 1,842

Originally Posted by sunnyhobby View Post
Hello there and thanks in advance,

Recently my mechanic change the valve cover gasket and he didnít mention that I need to change the whole valve cover . Thanks to all the online help I decided to do it on my own but I made a big mistake

There was a lot of oil in all the spark plugs well . I cleaned a little bit but then I took the spot plugs out Without realizing that the oil really get into the cylinder .

Can anybody tell me what should I do should I try to take a paper napkin and try to clean the cylinder or what should I do thank you for your help
A little oil entering the cylinder isn't going to hurt anything. You could put a rag over the hole and have someone crank the engine and the compression will blow the oil out of it.
Reply With Quote