#1
|
|||
|
|||
heated o2 sensor
heated o2 sensor sl the c.v......is there an easy way to install this sensor on an 08 nissan versa sl 1.8 liter. the 0139 shows up on the scanner and i've done the wiring checks....i have tried, (althou very difficult to get too), to loosen it. the boss for the threads needs to be heated and you'd probably end up burning a hole in the exhaust pipe because of the location of the sensor. the big 2 bolt flange on the front of that pipe appears to be too big to pass thru that narrow area to get the pipe out,,,,,appreciate any help here. bill
|
#2
|
||||
|
||||
1. you will need a O2 sensor socket (22mm or 7/8 in.) and 3/8 dr. wrrench available at any parts store. depending how much clearance you might need the short version. if it is seized, give it a couple squirt or more of PB Blaster and wait for 5-10 minutes. refer to engine control manual page EC-273. manuals are found in Knowledgebase section.
|
#3
|
|||
|
|||
o2 sensor
thank you very much , greatly appreciated... bill
|
#4
|
|||
|
|||
were you able to get the o2 sensor off? How did you do it? Was it the one downstream under the car on top of the exhaust pipe? I cant fit any tools in there. ANy help would be appreciated.
|
Tags |
heated, sensor |
Thread Tools | |
Display Modes | |
|
|