#1
|
|||
|
|||
2003 sentra s-er codes HELP PLEASE
I have a 2003 nissan sentra ser and have spent all summer trying to take care of the check engine light. everyone I get one thing fine and the light out, another code is thrown a week later. I have done botb O2 sensors, coilpacks, plugs, crank shaft sensor, and exhaust resinator. New I have 3 codes coming up P0240, P0455, and code P1448. can someone please tell me what all this means and what I should do? I would greatly appreciate it
|
#2
|
|||
|
|||
nissan does not use a P0240 code. try using a different OBD-II reader
P0455-EVAP control system gross leak detected check the gas cap first. if the seal is cracked replace it with an oem one. Fuel filler cap remains open or fails to close. Incorrect fuel tank vacuum relief valve Incorrect fuel filler cap used Foreign matter caught in fuel filler cap. Leak is in line between intake manifold and EVAP canister purge volume control solenoid valve. Foreign matter caught in EVAP canister vent control valve. EVAP canister or fuel tank leaks EVAP purge line (pipe and rubber tube) leaks EVAP purge line rubber tube bent. Loose or disconnected rubber tube EVAP canister vent control valve and the circuit EVAP canister purge volume control solenoid valve and the circuit Fuel tank temperature sensor O-ring of EVAP canister vent control valve is missing or damaged. EVAP control system pressure sensor Refueling EVAP vapor cut valve ORVR system leaks P1448-EVAP canister vent control valve open EVAP canister vent control valve EVAP control system pressure sensor and the circuit Blocked rubber tube to EVAP canister vent control valve EVAP canister is saturated with water Vacuum cut valve |
Tags |
2003, codes, sentra, ser |
Thread Tools | |
Display Modes | |
|
|