#1
|
|||
|
|||
04 sentra po340 stored, only when cold
I've got an 04 sentra with po340 stored. Wont accelerate when the engine is cold. Engine acts like it is cutting of the spark or fuel. When engine warms up it runs perfect. I repaced MAF, Cam position sensors, o2 sensors, temp sensors, and checked cam shaft position sensor wiring for shorts. Has anyone run into this or have any suggestions. I'm tired of the guessing game. Maybe bad ECU?
|
#2
|
||||
|
||||
Does your Sentra still has the acceleration problem or its just the code?
Have you had the sensors recall done? Knowledgebase - 2004 Sentra - Nissanhelp.com The P0340 can also be triggered by bad starter or weak battery.
__________________
Need A Repair Shop? Find local automotive repair shops in your area. AutoCodes.com Shops |
#3
|
|||
|
|||
hi I have same problem with sentra 02 47.000 miles dealer change camshaft and crankshaft but still i have 340 code and engine running rough no power,acceleration problem cant pass over 2500 rpm i forgot and he change maf sensor nothing help what else I can check ?
thank you Last edited by borys76; 12-11-2008 at 04:57 PM. |
#4
|
|||
|
|||
please let me know what else I can check I can't drive more then 5mph ,on nutral or parking engine runs smooth no problem but when I start acceleration no power and backfire can't pass 2000rpm still have 340 code
thank you for any answer |
#5
|
|||
|
|||
now i got 2 codes 340 and 335 camshaft and crankshaft dealer keep the car for 3 days change crankshaft and camshaft 2 times , same problem i can't belive they give me car back and they did not fix the problem can't drive ,car does not have power ,bad acceleration , rpm go up and down like crazy
please sombody can help me maybe bad ecm computer? sorry for my bad English but Im from Poland |
#6
|
||||
|
||||
have they performed the ecm reprogram recall Knowledgebase - 2002 Sentra - Nissanhelp.com maybe this is what needed
__________________
2002 Maxima GLE Silver on Black | Berk Intake w/AEM Dryflow | Clear Sidemarker Lights w/PIAA L.E.D|PIAA L.E.D Courtesy and Licence Plate Lights|PIAA White Fogs |Fibre Customs EyeLids | 5% Limo Tint | Brembo Blanks and Hawk HPS Pads |Ebay FSTB|CATTMAN RSB| NWP VIAS Block plate and NWS Spacers| OEM Spoiler | 07 350 z rims on 235/45/18 Goodyear Eagle GT tires| Megan Racing OE-RS Catback | in training |
#7
|
|||
|
|||
it is posible that dealer put crankshaft to camshaft,i take out camshaft sensor and i think its crankshaft the number its A29-630-BJ1 I have to pick up the car and see what he put in crankshaft but i belive he put camshaft or they are same part
|
#8
|
||||
|
||||
It is possible to swap the parts into the wrong locations.
|
#9
|
|||
|
|||
i was right crankshaft was in camshaft I swiched the parts start the car same problem no power can't acelerate then look at dealer invoice he changed veriable taiming control sensor too ,so i take out this sensor part number :A29-640-CJ0 check on internet and i can't belive this is RIGHT CAMSHAFT SENSOR FOR VQ35DE can't wait to see the dealer tomorrow i hope i found the problem but why the car start without problem with this sensor? and at the parking or nutral engine runs perfect only when start aceleration there is no power and looks like engine needs more gas
|
#10
|
|||
|
|||
I just back from dealer he put another sensors car does same thing no power can't accelerate burns alot gas still code 340 , he told me that looks like timing chain jumped so I have question if its posible that chain jump (car only have 45000) and start perfect , on nutral or parking runs smooth, he wants 2000$ to fix it.
I think that is ECM problem and he no want to change becouse its under warranty any help please |
#11
|
|||
|
|||
check ground wire to sensor. get a new battery
|
#12
|
|||
|
|||
changed battery , but dont know how to check ground wire?
thank you |
#13
|
|||
|
|||
its possible that timing chain jump (car only have 45000)?
|
#14
|
|||
|
|||
just did compression test 150 150 150 175
|
#15
|
||||
|
||||
from ondemand5
normal 1.8 192 psi 2.5 182 psi minimum 1.8 168 psi 2.5 154 psi maximum variation between cyl is 14psi 150 is kind of low and 175 the diff is 15 so might want to check it out, what engine do u got? |
Tags |
cold, po340, sentra, stored |
Thread Tools | |
Display Modes | |
|
|