#1
|
|||
|
|||
1999 Nissan Quest Blower works full speed only
Hi - I just joined this forum.
My blower for 1999 nissan quest works only at full speed. Reading information on the web i concluded my problem was the blower resistor module. I ordered one from autozone and thought i would eventually figure out where the part is located. Problem: When i look under the glove compartment i see a 4 wire connecter that is straight while the part i have has a 4 pin male square connector. Either i looking at the wrong connector under the glove compartment or i have recvd a wrong part. Can anyone point me to a diagram that shows the location/shape of the module. Thanks Harry |
#2
|
|||
|
|||
In the 2002 it is up under the dash. The Nissan Parts store at the dealership only charged me $32 for the part. Took about 5 minutes to change out.
|
#3
|
||||
|
||||
if it the fan control amplifier its behind the glove box is that the same or try below right side of the dash
__________________
2002 Maxima GLE Silver on Black | Berk Intake w/AEM Dryflow | Clear Sidemarker Lights w/PIAA L.E.D|PIAA L.E.D Courtesy and Licence Plate Lights|PIAA White Fogs |Fibre Customs EyeLids | 5% Limo Tint | Brembo Blanks and Hawk HPS Pads |Ebay FSTB|CATTMAN RSB| NWP VIAS Block plate and NWS Spacers| OEM Spoiler | 07 350 z rims on 235/45/18 Goodyear Eagle GT tires| Megan Racing OE-RS Catback | in training |
#4
|
|||
|
|||
Nissan changed the resistor module mid 1999 so I would pick up the module for the 2000 Quest, it should fit.
|
Tags |
1999, blower, full, nissan, quest, speed, works |
Thread Tools | |
Display Modes | |
|
|