#1
|
|||
|
|||
How much ATF for 01 Quest
How much ATF should be drained and replaced? The service manual says "if fluid is still dirty, repeat steps 2-5." I had my van serviced last week and was charged for 4 liters of ATF. The capacity is 9.4 liters. The fluid is still dirty. How much should a transmission fluid change have used? Is it reasonable to assume that they did not repeat? Should I be dissatisfied, or is replacing 42% of the fluid acceptable?
Is there a transmission fluid filter, or just a screen. Are you supposed to drop the pan or drain the ATF cooler? I am thinking the dealership I used is not performing quality work for over $700 for a service. QuestIons Changing A/T Fluid NDMA0007S07 1. Warm up A/T fluid. 2. Stop engine. 3. Drain A/T fluid from drain plug and refill with new A/T fluid. Measure amount of fluid drained and refill with equal amount of new fluid. Fluid grade: NISSAN Matic “D” (Continental U.S. and Alaska) or Canada NISSAN Automatic Transmission Fluid. Refer to “RECOMMENDED FLUIDS AND LUBRICANTS”, MA-11. Fluid capacity (With torque converter): 9.4 (10 US qt, 8-1/4 Imp qt) 4. Run engine at idle speed for 5 minutes.Drain plug: : 29 - 39 N·m (3.0 - 4.0 kg-m, 22 - 29 ft-lb) 5. Check fluid level and condition. Refer to “Checking A/T Fluid”, MA-24. If fluid is still dirty, repeat steps 2 through 5. |
Tags |
atf, quest |
Thread Tools | |
Display Modes | |
|
|