Transmission Code

[NissanTech]

Self-Diagnostic Procedure for 1994-2004.

1. Start engine and warm it up to normal engine operation temperature.
2. Turn ignition switch to 'OFF' position.
3. Set power shift switch to 'AUTO' ( For early models)
4. Set overdrive switch to 'ON'
5. Move selector lever to to 'P' position
6. Turn ignition switch to 'ON'
7. Shift indicator lamp should come on for about 2 seconds.
(if it doesn't more inspections is needed and code can't be retrieve)
8. Turn ignition switch to 'ACC' position
9. Move selector lever to 'D'
10. Set overdrive switch to 'OFF'
11. Turn ignition switch to 'ON' position (Do not start engine)
12. Wait more that 2 seconds after ignition switch 'ON'
13. Move selector lever to '2' position.
14. Set overdrive switch to 'ON' position.
15. Move selector lever to '1' position.
16. Set overdrive switch to 'OFF'
17. Depress accelerator pedal fully and release it.
18. Check power shift indicator lamp. The lamp will begin to flash ON and OFF ( "OD OFF" lamp for 1996-2004). Refer to the attaches figures to diagnose the code.

**Judments 11 and 12 ( 'Figure #011' and 'Figure #012' ) are for 2000-2004 models.

t1=2.5 seconds, t2=2.0, t3,t4=1.0,

[momud]

http://www.nissanhelp.com/Ownership/...ne%20Light.htm

on pathfinders the change from OBDI to OBDII actually happened in 96. <95 = OBDI; 96< = OBDII