broken wire p0452
been getting a code of p0452 EVAP CONTROL SYSTEM PRESSURE SENSOR low so i took the charcoal canister apart and found the green wire going to the pressure sensor is broken going into the grey wiring clip that goes onto the pressure sensor, but the problem is that it's broken in such a way that i can't re splice the wire because it's broken too close to the connector(clip). do the wiring connectors come apart so i could rewire the connector, or can i buy a new connector and rewire the whole thing by cutting all three wires??? i was able to pull the white piece out that is the side of the connector that connects to the sensor but i am lost from here
Last edited by dsm0274; 09-04-2011 at 03:13 AM.
Reason: picture
|