Login  |  Register
Nissanhelp.com - All About Nissan
Do-It-Yourself Maintenance Owners Manuals Recalls/Campaigns Service Bulletins Service Manuals Nissan OBDII Codes Glossary & Acronyms More...
Member's Ride Photos Stock Photo Gallery
Classifieds - For Sale Classifieds - Wanted To Buy Classifieds - Mechanic Wanted Classifieds - Auto Services Search Auto Parts
Register FAQ Social Groups Mark Forums Read
2004 murano misfire under load Forums > > 2004 murano misfire under load 2004 murano misfire under load
Forgot Password? Join Us!


Murano Nissan Murano Discussion Forum

Reply
 
Thread Tools Display Modes
  #1  
Old 04-23-2017, 02:41 PM
claudedunn claudedunn is offline
Registered User
2004 Murano
2004 murano
 
Join Date: Jan 2017
Location: Canada
Posts: 3
Question 2004 murano misfire under load

ok, i have a 2004 murano 3.5, bought it use, had a few, well a lot of problems, so, changed both valve covers and pcv, plug oil seals where leaking, had one bad coil, got a set of new coils and plugs, original ones, used to have a code p0300, now its sometimes pending, once we replaced all those parts, it was fine for the first ride, after that, i get misfire or hesitation under light load or coasting, way to much gaz, not a real electrical misfire, idle or full throtle, no problem, things we founds, intake was full of oil, its smoking a bit, cat are empty, compression is betwen 130 and 138 all cylinders, we checked timing, cams are fine, the chain didnt jump, fuel pressure is 42 and higher on rev's, got the factory manual, its perfect, injecter where cleaned and tested, there all spraying fine and none are leakings, we had a 02 sensors bad that we changed, did the re-learn procedure, now, on o2 sensors, the readings are fine, on a/f sensors, bank 1 short trim ( long trims confirms it both) average is around 0% on driving normaly, but, on bank 2, average is a wopping 25%, but no code on a/f malfunction, just a pending 0300 sometimes when we try to drive it nicely, gas consumption is......like a v16 (drive computer says 32 ), we tested with propane for vacum leaks, none, all the vacum lines seems at the rigth places, im really getting desesperate, have an obdb car doctor for readings

Last edited by claudedunn; 04-23-2017 at 03:53 PM.
Reply With Quote
  #2  
Old 04-23-2017, 07:32 PM
smj999smj's Avatar
smj999smj smj999smj is offline
Master Enthusiast
2006 Pathfinder
2003 Frontier King Cab
2003 Frontier KC SVE 4x4
 
Join Date: Jun 2012
Location: Prospect, VA
Posts: 1,866
Default

That compression sounds pretty low. I think normal compression is around 185 psi with a minimum of 142 psi, if my memory serves correct.
Reply With Quote
  #3  
Old 04-24-2017, 04:41 AM
claudedunn claudedunn is offline
Registered User
2004 Murano
2004 murano
 
Join Date: Jan 2017
Location: Canada
Posts: 3
Default yes

yep, its 4 psi low, but difference betwen high and low is in spec, start nice even at -25 celsius, got plenty of power when you hit the accelerator, just doest want to cruise or accelerate lightly without jerking , it did once when we replaced the plugs and coils my son in law and me when we took it out for 20 minutes, we do suspect the A/F bank 2 25% average being the fault, but its not sending a code ?


revised our notes, all cylinder where at 178 except 5 at 172

Last edited by claudedunn; 04-24-2017 at 01:31 PM.
Reply With Quote
Reply

Tags
2004, load, misfire, murano

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -8. The time now is 09:33 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO v2.0.42 (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.