NTB04-049e

[NissanTech]

A new entry has been added to Knowledgebase

Description: -REVISED-
VARIOUS NISSAN MODELS; TRAILER LIGHT WIRING

This TSB contains the appropriate hookup points for connecting a trailer light wiring harness to the towing vehicle’s electrical system.

To check it out, rate it or add comments, visit NTB04-049e
The comments you make there will appear in the posts below.

[riversideblues10]

i have a 2006 nissan frontier trying to hook up trailer lights went to the nissan store an bought the wireing kit . hooked up the part under the truck, it said that on the passenger side to remove the kick plate an insert the relays in the relay sub harness, kit came with relays an wireing plugin but when i removed the kick plate there was no wireing harness to plug into could you help me find the plug in for the relays thanks john

[riversideblues10]

this still doesn't show me where the hookup is for the 2006 frontier under the kick plate on the passenger side of the truck. i have the nissan factort hook up i bought at the nissan store . i just need to find wher ethe hook up is for the wire with the relays on it hooks up

[mpe235]

Originally Posted by riversideblues10

this still doesn't show me where the hookup is for the 2006 frontier under the kick plate on the passenger side of the truck. i have the nissan factort hook up i bought at the nissan store . i just need to find wher ethe hook up is for the wire with the relays on it hooks up

Pull the plastic trim off at the passenger kick panel. You will find a white plastic piece with a bunch of wiring connections. Look at the wires at the back of those connections. You will find a loose plug not connected to anything ( it may be taped to the harness). Plug your relay jumper harness into it and then put the relays in the open space on the white plastic piece.

Don't confuse the kick panel with the sill plate. The kick panel is the one close to the dash not the long skinny one that runs along the door.

[wehrlefp]

I have a new Rogue which is suppose to come with trailer hitch prewiring per window sticker, I cannot find these wires, this website says I've downloaded the NTB, I have never seen it, it does not exist on this Pc, can some one help, either instruct me on this website's use or tell me where to find the wiring the dealer service manager cannot even guide me to!

[NissanTech]

The bulletin only shows the wire configuration, not the locations of the harness connector.

The harness connector should be around the tow hitch.

Here is what the bulletin shows:

[wehrlefp]

Thank you, this should at least give wire colors to look for.

[SLAWDBlack]

:confused: I am totally confused on the whole Pre-Wiring issue with the Rogue. Yes, my Rogue SL window sticker reads "Tow Hitch Pre-Wiring" but what does that mean? I didn't order the towing package so no hitch or wiring came with my Rogue. I assumed pre-wiring meant that my Rogue would come with a flat 4 pin connector tucked away somewhere. Well I have thoroughly searched my vehicle and it's not to be found. I have read on other forums that there really is no pre-wiring and that I have to purchase a $160 trailer wiring harness from Nissan. Can anyone shed any light on this?