#1
|
|||
|
|||
05 Murano CEL i hate it
my 05 Murano has the P0037 we just changed the Bank 1 Cat P420 (aftermarket cat) now we are getting the P0037 which we never had and we clear the code it doesn't come right on until we drive it a minimum of 7 miles, we checked the fuse and to see if any signs of exposed wires, we swapped it for a senor we had for our Maxima and back again and it still shows the same code.
|
#2
|
||||
|
||||
The sensor itself could be NG specially if has 100k miles or more. You have to test it. Insulations on wires may look good so its hard to tell. Reference values are in the Engine Control manual. Manuals are found in the Knowledgebase section at the top menu. Did you use the B1S2 sensor from your Maxima or just any sensor.
|
#3
|
|||
|
|||
thanks BennyB53
I used my B1S2 from my maxima. which at one time was having an issue with a P0158 but worked for 100 miles and then thru the code again so I figured it was still good. |
Tags |
cel, hate, murano |
Thread Tools | |
Display Modes | |
|
|