running rough help
I have a 96 P/U XE, with automatic transmission. I installed a new crankshaft and new mains and rod bearings, new cam gear, chain, tensioner and guide and rear, front seal. I torxed everything to specs, no leaks, timing at TDC for #1 plug reinstalled auto trans everything is put back together. When I start the engine runs real rough and stalls do not understand why, used carb cleaner to try and find vacuum leaks and not found any. I can shift the transmission, the shifter move on the trans, but does not seem to change gears the trans is hooked up to the shifter in the truck. When running sounds like a diesel, but I can see the oil splashing in the valve cover. Any help would be much appreciated !!
Last edited by garvan55; 09-29-2013 at 06:07 AM.
Reason: left truck out
|